Showing 17–32 of 70 results
5 Ton Horizontal Lifting Clamp PDB Series
The features of Lifting Clamps-PDB Series:
-PDB Series are suitable for the lifting and horizontal transfer of single steel plate.
-Capacity range from 05 Ton.
-Jaw Opening Size - 0-55mm
-Made of high-quality alloy steel precision forging.
-The working load is the capacity of one pair.
-It could be used one pair or two pairs of clamps
50mm / 100mm Height Presetter – HP-50Z / HP-100Z ( VERTEX )
Height 50 mm and 100 mm.
With Magnetic base.
The red lamp will be lighted up when touched.
Accuracy 0.005 mm.
Combined vertical and horizontal in a unit.
Weight:0.7 kgs
6″ One-Handed Heavy-Duty Bar Clamp 1964711 ( Irwin®-QUICK-GRIP )
New Quick-Change button easily converts clamp to spreader
New removable, swivel jaws and non-marring pads
Adjustable foot provides added support and enables clamp to sit upright on the work surface
600 lbs of sustained clamping pressure
I-beam bar design reduces bending and flexing even under extreme pressure
6Pcs CirClip Pliers Set – 50653 ( FORCE )
Circlip pliers for inner rings, bent 90° 180mm
Circlip pliers for outer rings, bent 90° 180mm
Circlip pliers for inner rings, straight 180mm
Circlip pliers for outer rings, straight 180mm
Crimping Pliers for inner circlips, straight 230mm
Crimping Pliers for outer rings, straight 230mm
Action Aviation Snips ( IRWIN )
250mm long with a 3.34cm length of cut
The cut capacity of 1.19mm sheet metal and 0.84mm stainless steel
ALUMINIUM OXIDE PINK MOUNTED POINT SET 14PCS ( LUKAS )
PERFECT RESULTS ON STEEL AND CAST STEEL WITH
PINK ALUMINIUM OXIDE MOUNTED POINT SET OF 14PCS
SHANK 3 MM
Perfect dimensional stability: fits perfectly in the drive machine
High hardness and sharpness for a long service life
Rustproof due to zinc-nickel coating
Also stretches harder materials efficiently
No dangerous shaft breakage thanks
Centering Indicator – VCI-170 ( VERTEX )
RPM Within 800.
Use for Internal or External.
Use for Vertical or Horizontal.
While Spindle Rotates, With Stop bar for Fixing The Head The centering Indicator Always faces the operator.
Clamp Head – TM130 ( IRWIN )
1" x 1-1/2" / 25 x 38mm TO ANY LENGTH
Cordless Hydraulic Crimping Tool – EPL-4301 ( OPT )
12 tons cordless crimping tools (14.4V)
3 sizes C-head opening.
360 degrees swivel head.
Pistol type crimper.
EPL-4301 (14.4V Li-Ion)
43mm C-jaw opening
EPL-4201 (14.4V Li-Ion)
42mm C-jaw opening
De-soldering Pump Suction Tin Solder Suckers ( Pro’sKit )
30cm-Hg- Sucti0n
One-Handed Operation
Easy to clean
Digital Level Protractor/Bevel Box – BB-digilevel ( METROLOGY )
Features
with wide measuring range of +/-180 degree (0 ~ 360 degree) with 0.1 Repeat-ability
Powerful built-in magnets on the base secures the attachment to any iron surface
Easy-read large readout LCD display
Fast and accurate measurements
Auto power off after 5 minutes of no operation
Resolution: 0.05 degree
Measuring
Electric Chain Hoist – DST- 0.5 – 2Ton ( DAESAN )
0.5T to 2T ( 50Hz/60Hz); 3-Phase
Hoist Motor Brake - Maximize service life
Upper Limit Switch Device - Maximize stability
Overload Protection Device (Friction Clutch + Overload Limiter)
Compact design and performance
Economical hoist
Electric Portable Electrode Oven/Dryer ( UWELD )
• Electrode Capacity: 5-10KG
• Input voltage: AC 230V
• Power: 80-600w
• Max temperature: 15-500
FOODSLIP ( Food-grade anti-seize ) 500g – MOLYSLIP
NSF-registered, Food-grade anti-seize
FEATURES AND BENEFITS
Suitable for incidental food contact – NSF registered
Ensures consistent friction between threads
Protects against galling and seizure
Excellent protection against rust and corrosion
Eases assembly and dismantling of components
Gas Soldering Iron Kit-Auto Ignition – GS-23K ( PROSKIT )
3 IN 1 : * Hot Blowing * Soldering Iron * Blow Pen Torch
Compact size, light weight and portable to carry.
Use gas as its power without voltage and wire limitation.
Can be used as ordinary soldering iron, heat gun or flame gun with different tip.


















