The Star S106-141G 600mL Gravity Feed Spray Gun is a high quality and well balanced gun, suitable for professional applications. The large 600mL pot allows you to continuously spray for long periods of time without needing to refill, and is capable of providing a constant paint flow at low pressures.
Fluid Tip - 0.3mm
Atomising Pressure - 15~50psi
Max Pattern - >1~20mm
Recommended Compressor - 2cfm
Pot Capacity - 8cc
- Star Professional dual action control airbrush
- Stainless steel needle, and nozzle (screw in)
- Centre mount gravity-fed pot.
- Adjustable fluid needle, PTFE needle packer.
- Suitable for all types of airbrush paints & inks.
- Recommended for
Single action - designed for FIXED applications
Compatible with Standard Adaptors
Steel Construction - robust and hard-wearing, ideal for use in the engineering/workshop environment
Positive locking mechanism
British Standard Profile
Date stamping of each coupling to increase traceability and increase quality performance
Blue PCL silicone band for identification, protection and ease of
As the world’s leading linear gauge, the AIRFORCE® MK4 takes performance to a new level, offering even greater ease of use with a 20% larger screen and clearer to read scale. Meanwhile, PCL’s leading high-performance two-stage valve design ensures accuracy and longer life compared to competitors’ single-stage mechanisms, where filters
Light lever pull-down will connect the
plug and socket without fail ready to
flow liquid or gases.
• This Cupla complies with diversified applications in liquid or gases.
• This Cupla complies with diversified applications in liquid or gas transportation.
• End-face seal structure enables no bumps or hollows on the internal fluid
passage and ensures
Dry pressure gauge and vacuum gauge – rear diameter 40 from the case panel and plastic ring nut with a chromed ring on the outside of the case to improve its aesthetics.
Fixing with threaded ring nut 1/8 tapered scale -1/0 BAR up to a maximum of 16 BAR
Tank Volume: 600 ml plastic tank
Working Pressure: 1.5 bar/60 psi
Maximum Pressure: 4 bar
Material Flow /110 gr/min
Fan Width: 280 mm
Air Consumption: 200 liters/min
Air Intake : 1/4"M
Weight : 475 g
Nozzle Dimensions: 1.3
*For use with a wide range of liquids such as fuel oil/ diesel, water, AdBlue®, and antifreeze.
*Display can be rotated in 90⁰ increments.
*Meter is freely rotatable after installation
*Precise, robust, versatile
*Freely rotatable after installation
*Variable display orientation
*Large, illuminated display
*Precise measurements — less than ±1%
*Shows flow rate
*6-digit display
*Burst pressure of 20 bar
This Cleaning (Paraffin) Gun is ideal for degreasing, cleaning, and detergent coating purposes, even where aggressive chemicals are used.
Cleaning Gun
Working Pressure: 6-12 bar (87-174 psi)
Air Consumption @ 8 bar: 100 l/min (3.5 cfm)
Container: 1.2 litre
Nozzle length: 150 mm
Air Inlet: Rp 1/4
– extremely powerful and ultra light – max. torque 1350 Nm at just 2 kg weight – with vibration-damped composite housing – non-slip cold insulated handle – exhaust air guided through handle – always full capacity when loosening – clockwise- 3-step torque regulation when tightening – clockwise/counter clockwise performance regulation
