Showing 17–30 of 30 results
Eco/s Top Tank Spray Gun 1.3mm HVLP system ( ASTURO )
Tank Volume: 600 ml plastic tank
Working Pressure: 1.5 bar/60 psi
Maximum Pressure: 4 bar
Material Flow /110 gr/min
Fan Width: 280 mm
Air Consumption: 200 liters/min
Air Intake : 1/4"M
Weight : 475 g
Nozzle Dimensions: 1.3
ESSEX Jaw – Standard Spider Coupling ( FENNER )
Available Coupling Sizes
F-075 - 09/22mm bore - 44mm OD
F-095 - 15/28mm bore - 54mm OD
F-099 - 20/30mm bore - 65mm OD
F-0100 - 20/38mm bore - 65Amm OD
F-0110 - 20/42mm bore - 84mm OD
F-0150 - 30/48mm bore - 95mm OD
F-0190 - 36/55mm bore - 115mm OD
F-0225 - 40/60mm bore - 127mm
FMT 3 Electronic Flow Meters ( TECALEMIT )
*For use with a wide range of liquids such as fuel oil/ diesel, water, AdBlue®, and antifreeze.
*Display can be rotated in 90⁰ increments.
*Meter is freely rotatable after installation
*Precise, robust, versatile
*Freely rotatable after installation
*Variable display orientation
*Large, illuminated display
*Precise measurements — less than ±1%
*Shows flow rate
*6-digit display
*Burst pressure of 20 bar
Mechanical Ratchet Counters RS-50/204/205/207-5 ( KORI )
The mechanical counter connects with a machine variously and indicates the movement number of times of the revolution or the reciprocating motion
One (1) count per ratchet drive of 40 - 45 degree
Specification :
Number of Digits: 5
Shaft Position: Right-Hand Shaft
Metal Zinc Alloy PU Tube Cutter 4-12mm D700/1 ( VEPA )
Features
1. Material: Zinc Alloy.
2. Cutting range: 4-12mm soft tubes.
3. length 130 mm
Plastic Quick coupling HI CUPLA ACE ( NITTO )
CHARACTERISTICS
Applications
pneumatic
Attachment
quick, push-to-lock
Material
plastic, metal
Pneumatic Cleaning Gun ( PSG142130 ) PCL
This Cleaning (Paraffin) Gun is ideal for degreasing, cleaning, and detergent coating purposes, even where aggressive chemicals are used.
Cleaning Gun
Working Pressure: 6-12 bar (87-174 psi)
Air Consumption @ 8 bar: 100 l/min (3.5 cfm)
Container: 1.2 litre
Nozzle length: 150 mm
Air Inlet: Rp 1/4
PNEUMATIC IMPACT WRENCH 1/2“, 1350 NM ( ELORA )
– extremely powerful and ultra light – max. torque 1350 Nm at just 2 kg weight – with vibration-damped composite housing – non-slip cold insulated handle – exhaust air guided through handle – always full capacity when loosening – clockwise- 3-step torque regulation when tightening – clockwise/counter clockwise performance regulation
Pneumatic Torque Wrench 3/4″ Drive – 500Nm – PTM 52 ( NORBAR )
Technical Specifications
Square Size: 3/4"
Max Air Pressure: 6.3 bar
Air Consumption: 19 litres/sec (40 CFM)
Tool Weight: 4.1 kg
Reaction Plate Weight: 0.85 kg
Free Speed: 224 rpm
Safety Goggles 3 in 1 – 887 ( ELORA )
DESCRIPTION
in neoprene pouch with 2 inside pockets for extra lenses
frame made of black nylon and anti-slip rubber nose bridges
adjustable bridge
with 3 interchangeable plastic lenses (clear, smoke-colored and yellow)
according to EN166 and CE standard
Sandblast Gun with 1.5mtr Suction Hose Assembly STG ( ASTURO )
Features
The ST self-priming sandblasting gun is ideal for large areas
Treated steel inner nozzle
Treated steel (highly resistant to wear) outer nozzle
Total weight - 1020g
Air consumption - 315 l/min (11cfm)
Fluid nozzle diameter - 6mm
Sand suction hose length - 1.5m
Undrcoating Gun ( S-031 ) STAR
Product Description
Star type s-031 For anti-rust car chassis, or the inner vendor Original Star Taiwan
Wall Mounted Analog Tyre Inflator 145PSI – WMI ( PCL )
Accuracy: +/- 0.5% full scale reading
Maximum inflation Pressure: 10bar
Resolution: 0.1bar
Highly accurate, easy to use, reduced maintenance and lifecycle costs.
Functional Flexibility.
Accurate Pressure reduces tire wear, extends tyre life.
Default to safe setting after non-use time out.
Auto-start inflation
Default to safe setting
Aluminum die-cast casing
Wall Mounted Digital Tyre Inflator 145PSI – D10 ( PCL )
Consistent cost effective provision of high levels of safe air inflation services
Low life time costs - long product life with robust design and proven electronics
Low and simple maintenance with excellent diagnostics
Customisation to meet individual needs and applications
Ceramic sensor - accuracy to +/-0.5% of full scale reading