Measuring & Marking Tools

⊞ Grid view ⊟ List view

Filter

Showing all 16 results

Default sorting

Availability

In stock
Out of stock

Quick view

Wishlist

WishlistWishlist

138PSI TYRE INFLATOR – TDR 2000 ( JAMEC PEM )

Product Specifications: Operation: Inflate / Deflate / Measure Chuck Type: Hold on Chuck Style: Dual angle Scale: psi, kPa Supply Pressure Max: 200 psi Max Inflation: 138 psi Inlet Size: 1/4" BSP Hose Length: 500 mm Accuracy: ¬± 2 psi @ 25 - 75 psi Application: Industrial, Workshops

174PSI DIGITAL TYRE INFLATOR – TDR 3000 ( JAMEC PEM )

Product Specifications: Operation: Inflate / Deflate / Measure Chuck Type: Hold on Chuck Style: Dual angle Scale: psi, kPa, bar Supply Pressure Max: 200 psi Max Inflation: 174 psi Inlet Size: 1/4" BSP Hose Length: 500 mm Accuracy: ¬± 2 psi @ 25 - 75 psi Operation: Inflate, Deflate, Measure Application: Industrial, Workshop

Dial Gauge ( BAKER )

Plunger Dial Gauge Metric Bezel Dia. Type Reading Range Graduation 56 mm K03 0.01mm 5 mm 0-05-0 56 mm K04 0.01mm 5 mm 0-100 56 mm K01 0.01mm 10 mm 0-50-0 56 mm K02 0.01mm 10 mm 0-100 56 mm K08 0.01mm 25 mm 0-100 56 mm K09 0.002 mm 2 mm 0-10-0 56 mm K10 0.002 mm 2 mm 0-20 56 mm K11 0.002 mm 5 mm 0-10-0 56 mm K12 0.002 mm 5 mm 0-20 56 mm K13 0.002 mm 12 mm 0-10-0 56 mm K14 0.002 mm 12 mm 0-20 56 mm K17 0.001 mm 1 mm 0-100-0 56 mm K05 0.1 mm 10 mm 0-10 56 mm K06 0.1 mm 25 mm 0-10

Dial Gauge (Standard,0-10mm,0.01mm) DG-9010A ( Metrology )

Measuring Range: 0-10mm Graduation：0.01mm Accuracy: 15um Remark: Φ 55mm; Aluminum body, shockproof

Digital Caliper Absolute-EC-9001AB ( Metrology )

Brand name Metrology Model EC-9001AB Measuring range 0 to 150 mm or 0 to 6 inches Resolution 0.01 mm Accuracy ±0.02 mm Absolute sensor measuring system with factory calibration certificate JCC Calibration Certificate

Digital Multimeters ALL-IN-ONE CD800a ( SANWA )

Tough body cover 4000 counts Best accuracy 0.7％ Auto power off(30min.)(cancelable) Low power ohm(input voltage 0.4V)at continuity range Solid & protective body cover that can also be used as a tilt stand Chip resister holder behind the body cover

Electronic scale (general precision dial indicator) ED-9013HN ( Metrology )

Product's name: Digital odometer 0-13mm/0.5” Product code ( Model / Code / Part No. ): ED-9013HN Trademark: Metrology Unit: Female Packing: Updating Measuring range: 0-13mm/0.5” Division line: 0.001mm/0.0001” Origin: Taiwan

FMT 3 Electronic Flow Meters ( TECALEMIT )

*For use with a wide range of liquids such as fuel oil/ diesel, water, AdBlue®, and antifreeze. *Display can be rotated in 90⁰ increments. *Meter is freely rotatable after installation *Precise, robust, versatile *Freely rotatable after installation *Variable display orientation *Large, illuminated display *Precise measurements — less than ±1% *Shows flow rate *6-digit display *Burst pressure of 20 bar

Light Meter – 530 ( CENTER )

SPECIFICATIONS Light Range: 0.0~19990 fc ; 0.0~199900 lx Resolution: 0.1 Lx; 0.1 FC Accuracy: ±3%rdg, ±5dgts Sample Rate: 2 times/sec Auto Power Off: 30 minutes Battery: Size AA battery x 2 Dimensions: 169x63x37 mm Weight: Approx.210g

Manual Pressure Testing Pumps HHS-6.3L ( TLP )

Testing of water lines & containers Lightweight, easy, and simple operation

Measuring Tape ( Starrett )

Cat. No. EDP Blade Size Graduation* KTX12-12-N 30649 1/2" x 12' English KTX12-12ME-N 30650 1/2" x 12' (3.5m) English/Metric KTX12-3.5M-N 30648 1/2" x 3.5m Metric KTX34-16-N 60400 3/4" x 16' English KTX34-16ME-N 30652 3/4" x 16' (5m) English/Metric KTX34-5M-N 30651 3/4" x 5m Metric KTX1-16-N 30653 1" x 16' English KTX1-25-N 30654 1" x 25' English KTX1-26ME-N 30655 1"

Plastic Sheet Cutter LC-701 ( TAJIMA )

TAJIMA ( LC-701 ) Japanese Plastic Cutter Acrylic Plaster Board Knife

Stainless Steel Oil Sounding Tape / Oil Measuring Tape ( BMI )

Available Sizes 10mtr / 33ft 20mtr / 66ft 30mtr / 100ft

Swiss Style Dial Caliper-DC-9001HT ( Metrology )

Model No. Measuring Range Resolution DC-9001 DC-9002 DC-9003 0- 150mm/6” 0- 200mm/8” 0-300mm/12” 0.02mm Harden stainless steel Double Shock-proof DC-9001H DC-9002H DC-9003H 0-150mm/6” 0-200mm/8” 0-300mm/12” 0.01mm Harden stainless steel Double Shock-proof DC-9001HT DC-9002HT DC-9003HT 0-150mm/6” 0-200mm/8” 0-300mm/12” 0.01mm Tungsten steel Double Shock-proof

Test tool for optical power measurement as well as fiber optic visual fault location MT-7602 ( PROSKIT )

Test tool for optical power measurement as well as fiber optic visual fault location. Used for telecommunication networks & FTTx/FTTH applications. Pro'sKit MT-7602 is an essential fiber test instrument used for absolute optical power measurement as well as fiber optic visual fault location and cable testing. Easy to use for telecommunication networks

Wishlist

WishlistWishlist