Showing 1–16 of 41 results
1-13mm H. S. S Twist Drill Bits Set – 1361-S25 ( DORMER )
1-13mm x 0.5mm x 25pcs
ELORA No. 1361-S25
rising by 0,5 mm
in plastic folding box
high capacity twist drill bits, completely ground
for steel, cast steel, alloyed and non-alloyed (up to 900 N/mm²)
high true-running accuracy
from Ø 3 mm split point according to DIN 1412 C
point angle
10 to 25mm Manual Pipe Bender – HHW-25S ( TLP )
Model: HHW-25S
Capacity: Dia. 10-25mm
Pipe wall thickness : 0.8-2.0mm
Bending dies: 3/8",1/2",9/16,5/8",3/4",7/8",1"
100W Soldering Iron ( Feldhoff )
Feldhoff Soldering Iron is for thicker wiring (dia 2.5 – 6 sq mm) and thin sheet-metal soldering. With ceramic heater and wodden grip. Electrolytic copper bit, nickel-plated (non-scaling to a high degree). Nickel-plated copper bit dia. 7mm Warm-up time: approx. 10 min.
11R HOYT METAL – BEARING METAL TIN BASED
THE WORLD'S TOUGHEST
AND MOST DURABLE
ANTI-FRICTION METAL
2 In 1 SMD Hot Air Rework Soldering Station – SS-989B ( PROSKIT )
Description :
2X lifetime
Heat fast, 36sec-->300℃
Smart Microprocessor controlled
Auto cooling system
UL certified wire
3-in-1 Multi-Function Wire Stripper – LY-732 ( OPT )
Small manual 3 in 1 multi-function cable strippers
Model No.: LY-732
Stripping range:
For cable 0.5-6mm2
Tool length: 205mm
3/16″ Long Arms Pop Riveter – TS-20 ( PICUS )
Work size: 3.2, 4, 4.8 mm
Length: 460 mm
With the ability to rivet aluminum on aluminum and aluminum on steel
With the ability to rivet steel on steel and stainless steel rivets
Opening and closing the head with riveted nuts is done manually.
360° Rotatable Hand Riveter R360 ( IRWIN )
Product ID:
Comes with 4 nozzles for different sizes of rivets and a key for exchange:
2.4mm - 3/32
3.2 mm - 1/8 "
4.0 mm - 5/32 "
4.8 mm - 3/16 "
4″ x 1Ton Workshop Bench Vice ( RECORD – IRWIN )
About this item
Compact
Heavy-duty
Replaceable steel jaw plates
Capacity to clamp over one ton
Jaw width: 4in
Jaw depth: 60mm
Jaw opening: 4in
5 Piece Machinists File Set, American Pattern ( TOME FETEIRA )
The file set includes: flat, round, half-round, square, and three-square file
5 Ton Horizontal Lifting Clamp PDB Series
The features of Lifting Clamps-PDB Series:
-PDB Series are suitable for the lifting and horizontal transfer of single steel plate.
-Capacity range from 05 Ton.
-Jaw Opening Size - 0-55mm
-Made of high-quality alloy steel precision forging.
-The working load is the capacity of one pair.
-It could be used one pair or two pairs of clamps
6″ One-Handed Heavy-Duty Bar Clamp 1964711 ( Irwin®-QUICK-GRIP )
New Quick-Change button easily converts clamp to spreader
New removable, swivel jaws and non-marring pads
Adjustable foot provides added support and enables clamp to sit upright on the work surface
600 lbs of sustained clamping pressure
I-beam bar design reduces bending and flexing even under extreme pressure
6Pcs CirClip Pliers Set – 50653 ( FORCE )
Circlip pliers for inner rings, bent 90° 180mm
Circlip pliers for outer rings, bent 90° 180mm
Circlip pliers for inner rings, straight 180mm
Circlip pliers for outer rings, straight 180mm
Crimping Pliers for inner circlips, straight 230mm
Crimping Pliers for outer rings, straight 230mm
Action Aviation Snips ( IRWIN )
250mm long with a 3.34cm length of cut
The cut capacity of 1.19mm sheet metal and 0.84mm stainless steel
ALUMINIUM OXIDE PINK MOUNTED POINT SET 14PCS ( LUKAS )
PERFECT RESULTS ON STEEL AND CAST STEEL WITH
PINK ALUMINIUM OXIDE MOUNTED POINT SET OF 14PCS
SHANK 3 MM
Perfect dimensional stability: fits perfectly in the drive machine
High hardness and sharpness for a long service life
Rustproof due to zinc-nickel coating
Also stretches harder materials efficiently
No dangerous shaft breakage thanks
Cordless Hydraulic Crimping Tool – EPL-4301 ( OPT )
12 tons cordless crimping tools (14.4V)
3 sizes C-head opening.
360 degrees swivel head.
Pistol type crimper.
EPL-4301 (14.4V Li-Ion)
43mm C-jaw opening
EPL-4201 (14.4V Li-Ion)
42mm C-jaw opening