Showing 81–96 of 186 results
Drum Faucets & Drum Wrenches ( CASH JING )
Specifications
ITEM
PCS/CTN
NW/GW (kgs)
CUFT
H-30
40
16 / 17
0.6
H-303
40
25 / 26
1.65
H-304
40
24 / 25
1.65
H-311
80
19 / 20
1.65
H-312
80
18.5 / 19.5
1.65
H-305
40
22 / 23
1.65
H-301
6
17.5 / 18.5
1.2
H-306
12
14.5 / 15.5
1.6
H32-010
12
20 / 21
1.3
H32-0103
12
20 / 21
1.3
H-309
24
19 / 20
1.8
H-308
24
19 / 20
1.5
Dry Pressure Gauge and Vacuum Gauge ( ITALMANOMETRI )
Dry pressure gauge and vacuum gauge – rear diameter 40 from the case panel and plastic ring nut with a chromed ring on the outside of the case to improve its aesthetics.
Fixing with threaded ring nut 1/8 tapered scale -1/0 BAR up to a maximum of 16 BAR
DUAL ANGLE AIR CHUCKS – AIR LINE CONNECTOR ( JAMEC PEM )
Product Specifications
Chuck Type: Hold on
Chuck Style: Dual angle
Tail / Thread Type: Female
Tail / Thread Size: 1/4" BSP Female
Eco/s Top Tank Spray Gun 1.3mm HVLP system ( ASTURO )
Tank Volume: 600 ml plastic tank
Working Pressure: 1.5 bar/60 psi
Maximum Pressure: 4 bar
Material Flow /110 gr/min
Fan Width: 280 mm
Air Consumption: 200 liters/min
Air Intake : 1/4"M
Weight : 475 g
Nozzle Dimensions: 1.3
Electric Chain Hoist – DST- 0.5 – 2Ton ( DAESAN )
0.5T to 2T ( 50Hz/60Hz); 3-Phase
Hoist Motor Brake - Maximize service life
Upper Limit Switch Device - Maximize stability
Overload Protection Device (Friction Clutch + Overload Limiter)
Compact design and performance
Economical hoist
Electric Portable Electrode Oven/Dryer ( UWELD )
• Electrode Capacity: 5-10KG
• Input voltage: AC 230V
• Power: 80-600w
• Max temperature: 15-500
Electric Wire Rope Winch 500Kg – DU-210 ( DUKE )
Winch Body:
L(mm) x W(mm) x H(mm): 710 X 310 X 285
Package Box:
L(mm) x W(mm) x H(mm): 800 X 400 X 480
CBM: 0.154
Net Weight: 76Kgs
Gross Weight: 81Kgs
Applications:
Fit for various workplace applications, such as general factories, warehouses,construction, plumbing, and agriculture industries.
Features & Specifications
Engine Cylinder Hone 9G0901 ( FORCE )
Adjustable Honing Tension
Size Range 2" (50mm) Up To 7" (178mm)
Replaceable 100mm X10mm Stones 220 Grit
Overall Length 345mm
Twist Collar To Prevent Stone Damage
ESSEX Jaw – Standard Spider Coupling ( FENNER )
Available Coupling Sizes
F-075 - 09/22mm bore - 44mm OD
F-095 - 15/28mm bore - 54mm OD
F-099 - 20/30mm bore - 65mm OD
F-0100 - 20/38mm bore - 65Amm OD
F-0110 - 20/42mm bore - 84mm OD
F-0150 - 30/48mm bore - 95mm OD
F-0190 - 36/55mm bore - 115mm OD
F-0225 - 40/60mm bore - 127mm
Extended Diesel Engine Compression Test Kit – 937G1 ( FORCE )
Pressure gauge (70 bar / 1000 PSI), length 400 mm - 1 pc.
Adapters for glow plugs - 22 pcs.
Adapter 90 °.
Adapters for injectors - 5 pcs.
Set of clamps
Glow plug adapters: М12х1.25, L17.5 mm; М12х1.25, L20 mm; М10х1.25, L28.5 mm; М10х1.25, L42 mm; М10х1.25, L45 mm; М10х1.25, L44 mm; М10х1.0, L54
Flexible Shaft (225) DREMEL
Experience even more precision and manoeuvrability, even in hard-to-reach places
Enhance your Dremel Multi-Tool by adding more precision and increased reach for awkward spaces.
Get a higher standard of detail by using the Flexible shaft when engraving, polishing, carving and more with control and stability .
The lightweight design with
FOODSLIP ( Food-grade anti-seize ) 500g – MOLYSLIP
NSF-registered, Food-grade anti-seize
FEATURES AND BENEFITS
Suitable for incidental food contact – NSF registered
Ensures consistent friction between threads
Protects against galling and seizure
Excellent protection against rust and corrosion
Eases assembly and dismantling of components
Gas Soldering Iron Kit-Auto Ignition – GS-23K ( PROSKIT )
3 IN 1 : * Hot Blowing * Soldering Iron * Blow Pen Torch
Compact size, light weight and portable to carry.
Use gas as its power without voltage and wire limitation.
Can be used as ordinary soldering iron, heat gun or flame gun with different tip.
GASKET OIL PACKING SHEET – 0.15mm – 3.2mm ( TBA-FIREFLY )
TEMPERATURE: Maximum 120ºC
OJ9 is a cellulose fibre sheet sealing material impregnated with a glue glycerine compossision
H.S.S 10mm Welding Spot Cutter ( 622.00 ) HUNTER
spot weld cutters. These tools are used to separate spot-welded panels and are less likely to damage the sheet metal than a panel cutter.